Amount and intensity of physical activity and risk of incident cancer in the UK Biobank.
Journal article
Shreves AH. et al, (2023), Medrxiv
Device-Measured Physical Activity in 3,511 Individuals with Knee or Hip Arthroplasty
Preprint
Small SR. et al, (2023)
Development and Validation of a Machine Learning Wrist-worn Step Detection Algorithm with Deployment in the UK Biobank.
Preprint
Small SR. et al, (2023)
Impact of reduced sampling rate on accelerometer-based physical activity monitoring and machine learning activity classification
Journal article
Small S. et al, (2021), Journal for the measurement of physical behaviour, 4, 298 - 310
Impact of Reduced Sampling Rate on Accelerometer-based Physical Activity Monitoring and Machine Learning Activity Classification
Journal article
Small SR. et al, (2020)
Current clinical utilisation of wearable motion sensors for the assessment of outcome following knee arthroplasty: a scoping review.
Journal article
Small SR. et al, (2019), Bmj open, 9
Primary Stability in Cementless Rotating Platform Total Knee Arthroplasty.
Journal article
Small SR. et al, (2019), J knee surg
Mechanical Strength of the Proximal Tibia Following Total Knee Arthroplasty: A Cadaveric Study of Resection Depth and Bone Density.
Journal article
Sueyoshi T. et al, (2017), Surg technol int, 31, 170 - 176
Shell design and reaming technique affect deformation in mobile-bearing total hip arthroplasty acetabular components.
Journal article
Small SR. et al, (2017), Proc inst mech eng h, 231, 691 - 698
Characterization of Femoral Component Initial Stability and Cortical Strain in a Reduced Stem-Length Design.
Journal article
Small SR. et al, (2017), J arthroplasty, 32, 601 - 609
Digital image correlation techniques for strain measurement in a variety of biomechanical test models.
Journal article
Hensley S. et al, (2017), Acta bioeng biomech, 19, 187 - 195
Towards the optimization of the preparation procedures of PMMA bone cement.
Journal article
Gergely RCR. et al, (2016), J orthop res, 34, 915 - 923
A Finite-Element Study of Metal Backing and Tibial Resection Depth in a Composite Tibia Following Total Knee Arthroplasty.
Journal article
Tokunaga S. et al, (2016), J biomech eng, 138
Micromotion at the tibial plateau in primary and revision total knee arthroplasty: fixed versus rotating platform designs.
Journal article
Small SR. et al, (2016), Bone joint res, 5, 122 - 129
Mechanical Strength of the Proximal Tibia Based on Bone Density and Resection Level Following Total Knee Arthroplasty
Conference paper
Sueyoshi T. et al, (2016)
Biomechanical Analysis of Cup Deformation in Mobile Bearing THA Acetabular Components
Conference paper
Meding JB. et al, (2015)
Femoral Component Initial Stability and Cortical Strain in a Reduced Stem Length Design
Conference paper
Berend ME. et al, (2015)
The Effect of Taper Angle and Spline Geometry on the Initial Stability of Tapered, Splined Modular Titanium Stems.
Journal article
Pierson JL. et al, (2015), J arthroplasty, 30, 1254 - 1259
An Investigation of the Relationship between Plantar Weight Distribution and the Condition of Osteoarthritic Knees During Quiet Standing
Conference paper
Sutterer B. et al, (2015)